AMPLIFICATORE FINALE MULTICANALE CLASSÈ CA-5300
Finale di potenza a 5 canali ad alta corrente. 5 x 300W su 8 ohm. Circuitazione bilanciata a simmetria complementare. Dispositivi j-fets per l’ingresso, mosfet per i driver e transistor bipolari per gli stadi di uscita. Trasformatore toroidale. Ingresso RCA e XLR. RS-232. Trigger IN/OUT. Controllo IR IN/OUT. RJ45 per bus dati. Tecnologia ICTunnel per migliorare il raffreddamento e la qualità audio.
CA-5300 FIVE-CHANNEL AMPLIFIER
All tests un-weighted and 500kHz measurement bandwidth (except SNR). | ||
Frequency response | 1 Hz – 100 kHz, -3dB | |
Output power | 300W rms into 8Ω (24.8 dBW) | |
Harmonic Distortion | <0.002% at 1 kHz balanced | |
Peak Output Voltage | 167V peak to peak, 53V rms no load | |
Input Impedance | 50kΩ balanced / single ended | |
Voltage gain | 29dB balanced / single ended | |
Input level at clipping | 2.1V rms balanced / single ended | |
Intermodulation | >90dB below fundamental into >90dB below fundamental into | |
Signal to Noise Ratio | -116dB at peak output into 8Ω | |
Output impedance | 0.03Ω @ 1 kHz | |
Standby power | < 1W | |
Rated power | 1300W @ 1/8th power into 8Ω | |
Width | 17.5” (444mm) | |
Depth | 22.52” (572mm) (excluding connectors) | |
Height | 8.78” (223mm) | |
Gross weight | 115 lb (52.3 kg) | |
Net weight | 105 lb (47.7 kg) | |
Mains voltage | Specified on rear panel | |
* Specifications for output into 4 ohms are omitted because the AC Mains/power supply cannot support all channels driven simultaneously at this level, which would require over 5,000W and only occur under a special test condition. The amplifier easily drives lower impedance loads.






Recensioni
Non ci sono ancora recensioni.