The 10W1v2 is an outstanding choice when space is very tight and amplifier power is moderate. It features shallow mounting depth (4.34 in. / 110 mm) and a compact motor structure, allowing it to comfortably fit in a lot of spaces where a typical 10-inch driver will not. Lacking a pole vent, the rear of the motor structure can be placed directly against an enclosure boundary. Excellent excursion capability and linearity allow it to reproduce sub-bass with shocking extension and quality. Several of JL Audio’s proprietary technologies enhance its performance and reliability.
The 10W1v2-8 is best used with amplifier power in the 75W – 300W range and is optimized to operate in a compact 0.625 cu. ft. (17.7 l) sealed enclosure, or a 1.0 cu. ft. (28.3 l) ported enclosure. Detailed enclosure recommendations can be found in the “Specifications” tab.
Continuous Power Handling (RMS) 300 W
Recommended RMS Amplifier Power 75 – 300 W
Nominal Impedance (Znom) 8 Ω
Free Air Resonance (Fs) 26.52 Hz
Electrical “Q” (Qes) 0.472
Mechanical “Q” (Qms) 6.115
Total Speaker “Q” (Qts) 0.438
Equivalent Compliance (Vas) 1.735 cu ft / 49.10 L
One-Way Linear Excursion (Xmax)* 0.375 in / 10 mm
Reference Efficiency (no) 0.1900%
Efficiency (1 W / 1 m)** 84.67 dB SPL
Effective Piston Area (Sd) 53.522 sq in / 0.0345 sq m
DC Resistance (Re) 6.671 Ω
* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.
** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”.
MS

Lascia questo campo vuoto

Geometria, supporti, cablaggio, acustica

Non inviamo spam! Leggi la nostra Informativa sulla privacy per avere maggiori informazioni.

Ti abbiamo appena scritto: conferma l'iscrizione e ricevi il manuale.