SUBWOOFER 10WXV2-4 JL AUDIO

The 10WXv2 is an ideal subwoofer driver for lower power applications. It features excellent suspension linearity and a DMA-optimized motor system to keep distortion low. Our patented Elevated Frame Cooling design is also on-board for enhanced power handling and reliability.
The 10WXv2 is best used with amplifier power in the 75W – 200W range and is optimized to operate in a compact 0.625 cu. ft. (17.7 l) sealed enclosure, or a 1.0 cu. ft. (28.3 l) ported enclosure. Detailed enclosure recommendations can be found in the “Specifications” tab.
Continuous Power Handling (RMS) 200 W
Recommended RMS Amplifier Power 75 – 200 W
Nominal Impedance (Znom) 4 Ω
Free Air Resonance (Fs) 29.38 Hz
Electrical “Q” (Qes) 0.471
Mechanical “Q” (Qms) 10.021
Total Speaker “Q” (Qts) 0.45
Equivalent Compliance (Vas) 1.660 cu ft / 47.01 L
One-Way Linear Excursion (Xmax)* 0.375 in / 10 mm
Reference Efficiency (no) 0.2400%
Efficiency (1 W / 1 m)** 86.06 dB SPL
Effective Piston Area (Sd) 50.690 sq in / 0.0327 sq m
DC Resistance (Re) 3.51 Ω
* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.
** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”.
MS

Lascia questo campo vuoto

Geometria, supporti, cablaggio, acustica

Non inviamo spam! Leggi la nostra Informativa sulla privacy per avere maggiori informazioni.

Ti abbiamo appena scritto: conferma l'iscrizione e ricevi il manuale.